7: Working current: Less than or equal to 450mA@12V, 800mW
2. Frequency lock function
8:Less than or equal to 850mA@12V, 2500mW
3. It has 30.5*30.5 and 20*20 mounting holes
9:Output frequency: 40CH (A-B-E-F-R)
4. 0-2.5W power-adjustable
10:Antenna interface: MMCX
5:Output power: 0-25-400-800-1500-2500mW
11:Installation hole: 30.5*30.5mm-20*20mm
6:Input voltage: 6-36V
12:Video format: NTSC/PAL automatic detection
Features: 1. With its own power self-check function, you can quickly check whether the image transmission is working normally 2. Frequency lock function, no interference with companions when power on 3. It has 30.5*30.5 and 20*20 mounting holes at the same time to improve the compatibility of rack 4. 0-2.5W power-adjustable, allowing you to switch seamlessly in different environments
Frequency and Power Control Methods METHODS Adjust video transmission frequency and power by pressing the button Button frequency point control: short press the button once to switch 1CH-8CH cycle; button frequency group control: long press the button for 3 seconds, when the frequency group light RF flashes, other lights go out and enter the frequency group switching, short press the button again Switch frequency group A-R cycle; button power control: long press the button for 6 seconds, when the power light R flashes, other lights go out and enter the power adjustment, short press the button again to switch the power 0-2.5W cycle The bones are frequently displayed, the lining is sweeping the torch, and the torch is showing itself. Connect the RX white wire of the image transmission to the TX signal wire of the spare UART port of the flight controller;
We still have more Cost-effective fpv drones and parts